 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| PSPW120 Series 120 Watts with PFC 5" x 3" x 1.18" Single Output AC/DC Open Frame Power Supply FEATURES PFC > 0.9 Single Output Universal AC Input Output Voltages from 12 to 24VDC 5(L) x 3(W) x 1.18(H) inches (127 x 76.2 x 30 mm) Over Voltage/ Over Load/ Short Circuit Protected 5(L) x 3(W) x 1.18(H) inches SPECIFICATIONS: PSPW120 Series All specifications apply @ 25C ambient unless otherwise noted INPUT SPECIFICATIONS Input Range....................................................... 90-264VAC Input Frequency...................................................... 47-63Hz Input Current.............................. 2.5A max. (RMS) @ 115VAC Inrush Current............ < 30A peak at 115VAC cold start @ 25C ............................... < 50A peak at 230VAC cold start @ 25C ENVIRONMENTAL SPECIFICATIONS Operating Temperature........... 0C to +40C ambient derate each output at 2.5% per degree from +40C to 60C Humidity (non-condensing).................................... 5% to 95% Temperature Coefficient....................................... 0.04% / C Cooling..................................................... free air convection MTBF......... 80,000 hrs at full load and 25C ambient temperature OUTPUT SPECIFICATIONS Output Current...................................................... see table Output Power...................... 120W max with convection cooling Output Regulation.................................................. see table Ripple/Noise (20 MHz BW).............................................. 1% Hold-up Time....... 16ms at 120 watt load & 115VAC nominal line PHYSICAL SPECIFICATIONS Weight....................................................................... 10 oz Dimensions.................. 5 x 3 x 1.18 inches (127 x 76.2 x 30 mm) SAFETY & EMC Safety Standards................................................ UL 60950-1 ........................................................CSA C22.2 No. 60950-1 ..................................................................TUV EN60950-1 ...................................................................CB IEC 60950-1 EMC Standards.......................................FCC Part 15 Class B ............................................................... CISPR 22 Class B ............................................................... EN 55022 Class B ........................................................................... EN 55024 .......................................................... EN 61000-3-2 Class D ....................................................................................CE PROTECTION Short Circuit Protection....................................... Auto recover Over Voltage Protection....... Output 110%-130% above following nominal output. ................................................... Latching type, AC Recycle Over Load Protection........... Over load protected @ 105%-150% above following maximum rating. GENERAL SPECIFICATIONS Efficiency........................................... 85% typical at full load Power Factor...............................................................>0.9 Due to advances in technology, specifications subject to change without notice Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 PSPW120 Series 120 Watts with PFC 5" x 3" x 1.18" Single Output AC/DC Open Frame Power Supply OUTPUT VOLTAGE /CURRENT RATING CHART MODEL PSPW120B-1Y12P PSPW120B-1Y15P PSPW120B-1Y18P PSPW120B-1Y19P PSPW120B-1Y24P Output Voltage 12 VDC 15 VDC 18 VDC 19 VDC 24 VDC Min Load 0A 0A 0A 0A 0A Max. Output Current (convection cooling) 10A 8A 6.67A 6.32A 5A Output Power 120W 120W 120W 120W 120W Output Regulation 3% 2% 2% 2% 2% Ripple & Noise 120mV 150mV 180mV 190mV 240mV NOTES 1. At 25C including initial tolerance, line voltage, load currents, and output voltages adjusted to factory settings. 2. Peak-to-peak with 20mHz bandwidth with a tantalum 10uF capacitor in parallel with a 0.1uF ceramic capacitor. MECHANICAL DRAWING MATCHING CONNECTORS CN1 = AC INPUT MOLEX P/N: CN2 = DC OUTPUT MOLEX P/N: 09-65-2029 (OR EQUIVALENT) 09-65-2068 (OR EQUIVALENT) FEMALE HOUSING MOLEX P/N: 09-76-1020 (OR EQUIVALENT) FEMALE HOUSING MOLEX P/N: 09-52-4064 (OR EQUIVALENT) Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 |
Price & Availability of PSPW120
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |